DS VISUAL · Commercial display solutions

Indoor LED Display and LED Video Wall Solutions

Flat walls, true curves and hanging LED screens each require a different construction method. Compare Atomic 13, Tetsu and Show Series to plan a practical installation.

LED Video Wall Singapore

Three different build methods suit three different applications: Atomic 13 for flat walls, Tetsu for curved and custom forms, and Show Series for hanging installations in halls and stages.

Atomic 13 aluminium LED cabinet shown from the open front and the closed rear
Atomic 13 cabinet, front and rear (product render)

Atomic 13

Flat-wall option with a thinner aluminium cabinet and front maintenance.

See Atomic 13
Tetsu LED cabinet shown from the front and the rear
Tetsu cabinet, front and rear (product image)

Tetsu

Magnet-mounted modules on a custom-built frame for shapes and true curves.

See Tetsu
Show Series LED cabinet shown from the front and the rear
Show Series cabinet, front and rear (product render)

Show Series

500 × 500 mm cabinets with quick connections for chain-hoist hanging installations.

See Show Series

Running several sources or a picture-in-picture? See our video wall controllers.

Compare Atomic 13, Tetsu and Show Series

Atomic 13TetsuShow Series
Best forFlat walls; quick installationCurved, spiral and custom shapesHanging installs in auditoriums, multipurpose halls, community centre halls and stages
ConstructionModules fix into a 640 × 480 mm aluminium cabinetMagnetic modules on a custom-built frame500 × 500 mm cabinets, plug-in power box, quick power and data connections; flown on chain hoists
Finest pixel pitchP1.25P2 (DS VISUAL minimum)Usually P3 to P4
Cabinet depthAbout 60–75 mmAbout 90–100 mmNot a factor; hung on chain hoists
MaintenanceFrontFrontFront and rear
CurvesNoTrue curves and custom shapesSlight faceted arc only, using angled flat cabinets

Atomic 13 Series: Flat LED Walls Down to P1.25

Atomic 13 is our standard choice for flat LED walls. Its modules fix into rigid 640 × 480 mm aluminium cabinets, allowing easier and faster installation compared with a custom-shaped frame.

Atomic 13 is designed for flat installations, not curves.

Finest pixel pitch
P1.25
Cabinet depth
About 60–75 mm
Maintenance
Front access
Atomic 13 indoor LED cabinets mounted flat on a wall before the LED modules are fitted, with cabling exposed
CrimsonLogic: COB P1.25 LED wall during installation

LED Wall Size Calculator

Enter your wall size, then add or remove cabinets to see the screen size, resolution and weight. Based on Atomic 13 cabinets, 640 × 480 mm each.

Your wall (metres)
Cabinets

"Fill my wall" leaves about 5 mm on each side for installation.

Your content (optional)

Fills the whole screen, stretched to fit, on the drawing and in the pixel close-up. Your image stays on your device. It is not uploaded.

Your wall with the LED screen drawn to scale
Pixel close-up at P2

Drag to move around the screen. Each dot is one LED pixel, spaced at the pitch you picked.

Screen size
-
Resolution
-
Cabinets
-
Weight
-
Max power
-
Viewing distance
-

A planning guide, not a quotation. The drawing and pixel close-up are simulations. Colour, brightness and sharpness on a real LED screen will look different from your monitor or phone. Weight is for the cabinets only, not the mounting frame. We confirm power, structure and the final size after a site check.

Tetsu Series: Curved and Custom LED Walls

Tetsu uses LED modules held entirely by magnets on a custom-built frame. That lets us shape the display into curves, spirals and other custom forms.

We limit Tetsu to P2 and above. At finer pitches, keeping a curved or customised screen sufficiently flat and uniform becomes difficult, so we do not offer those pitches for this series.

Pixel pitch
P2 and above
Cabinet / build depth
About 90–100 mm
Maintenance
Front access
Curved Tetsu Series LED ribbons suspended above Hennessy product displays inside a retail store
Project: Hennessy spiral LED at Changi Airport Terminal 3 duty-free store.

Show Series: LED Walls for Auditoriums, Halls and Stages

Show Series uses 500 × 500 mm cabinets, a plug-in power box and quick power and data connections. It is designed to be flown on chain hoists in auditoriums, multipurpose halls, community centre halls and stages.

Its flat cabinets can be angled to form a slight faceted arc. For a true curve, choose Tetsu.

Show Series is commonly used in halls with around 6 m ceiling height; this is typical, not a minimum. Every Show Series cabinet can be serviced from the front or the rear.

Typical pixel pitches
P3 to P4
Cabinet size
500 × 500 mm
Maintenance access
Front and rear
Show Series LED wall above the stage at Events of Poiema
Projects: Events of Poiema (church) and Nam Ho Travel, hung behind shopfront glass facing out.

Choosing the Right Pixel Pitch

A smaller pixel pitch is generally chosen for closer viewing. For stages and halls where audiences watch from farther away, Show Series commonly uses P3 to P4.

Use the simple size and resolution planner below to start a discussion. It is not a substitute for a site assessment or a confirmed specification.

Two LED modules side by side: a larger pixel pitch module with widely spaced LEDs next to a fine pixel pitch module with densely packed LEDs
Larger and finer pixel pitch LED modules, side by side
LED screen 1280 × 960 mm

Pixel Pitch Visualiser

The same content on the same 1280 × 960 mm screen at three pixel pitches. Pick a viewing distance, or drag any screen to move around. All three screens move together.

View
Content

What pixel pitch means

Pitch is the distance between the centres of two LEDs, in millimetres. A smaller number packs more LEDs into the same screen, so it shows finer detail.

Why small text suffers first

Large titles look similar at every pitch. Small prices, fine print and Chinese characters need more LEDs per letter, so they break up first on a larger pitch.

Distance changes everything

Viewed from far away, the dots blend together and the screens look alike. The closer your audience stands, the smaller the pitch you need.

Not sure which pitch suits your space? Tell us the wall size and how far away people will stand, and we will recommend one.

WhatsApp us

Simulation only. This shows how the pixels are laid out, not how the screen will look in person. A real LED screen is far brighter than your monitor, and every monitor shows these dots a little differently. See the pitches side by side on the LED comparison wall in our showroom before you decide. Your image stays on your device; it is not uploaded.

Planning a Flush or Recessed LED Wall

For interior designers and architects: a fully zero-gap fit between an LED screen and surrounding wall or frame is not achievable because of installation workmanship tolerances.

Plan for about 5 mm clearance on each side. Atomic 13 cabinets are about 60–75 mm deep; Tetsu builds are about 90–100 mm deep.

Confirm the total niche depth, including mounting structure and cabinet, with DS VISUAL before finalising carpentry or wall details.
Flush-mounted indoor LED display set into a wall beside a glass entrance
Flush-mounted indoor LED wall

Installation and Maintenance Access

Front is the screen face that viewers see; rear is the back of the cabinet against the wall or structure. Leave access on the side where the technician works.

Atomic 13 and Tetsu are front-service, so they mount close to the wall. Keep about 60 cm clear in front of the display for maintenance. Avoid counters, shelves or partitions tight against the screen.

Rear-service screens, including many transparent and some outdoor LED displays, need a hand’s-width clearance at the front plus room to move so a module can be removed. We confirm the appropriate access arrangement for each installation.

Protecting LED Walls in High-Traffic Areas

In lobbies, malls, retail floors and event spaces, people may touch, lean on or knock an LED wall. Standard LED modules have exposed LEDs that can break off, leaving obvious dead spots. The right protection depends on pixel pitch and whether the screen is flat or curved.

LED wall typeProtection approachPlanning guidance
LED modules, P2.5 and finerGOB (glue on board), a clear protective layer sealed over the LEDs.Recommended when screens can be reached or knocked.
P3 and aboveProtective mesh grille over the LED modules.Designed to reduce knocks to exposed LEDs, including on Show Series screens.
Curved or spiral LED modulesFlexible GOB modules for curved and spiral Tetsu builds.Clear protective coating resists knocks, dust and moisture.

GOB protection is now available on both flat and curved Tetsu builds, using flexible modules for curves. A clear protective layer covers the LEDs, so they resist knocks, dust and moisture.

Hand bending a flexible GOB-coated LED module with water drops beading on its surface
Flexible LED module with GOB protection, water beading on the surface

Indoor LED FAQs

Which indoor LED wall should I choose?
For a flat wall, choose Atomic 13. For curved or unusual shapes, choose Tetsu. For hanging installations in halls or above stages, consider Show Series.
Why is Tetsu limited to P2?
Its magnetic modules sit on a custom frame. Below P2, keeping a curved or custom screen flat and uniform becomes unreliable, so DS VISUAL does not offer it.
Can the LED wall sit flush with no gap?
Not completely. Allow about 5 mm on each side for installation tolerances, and confirm the final niche depth with us.
Do I need space behind the screen?
Not for Atomic 13 or Tetsu. They are serviced from the front, so they mount flat against the wall. Keep about 60 cm clear in front of the screen for our technician.
What happens if people touch or knock the LED wall?
On a standard LED wall, knocks can break LEDs off and leave dead spots. For screens up to P2.5 that people can reach, we recommend GOB, which seals a protective layer over the LEDs. For P3 and above, we fit a protective mesh grille over the modules. GOB protection is now available on both flat and curved Tetsu builds, using flexible modules for curves. A clear protective layer covers the LEDs, so they resist knocks, dust and moisture.
Warranty and support:

DS VISUAL supplies this product under its own brand and handles the warranty. Standard 1-year warranty, extendable by 1 or 2 years at additional cost. LED warranties can be extended up to 5 years.

LET'S WORK TOGETHER

Big ideas?
Let's make them